Large-format porcelain and ceramic splice — a vertical edge that needs no further work.
Waterjet cutting for porcelain and ceramic slab: large-format cuts, splice work and tight profiles. The V5-axis head tilts 0–10° to keep the cutting surface vertical, so ceramic splice comes off the table with an edge that needs no secondary processing.
Built for ceramic & porcelain work.
Ceramic & tile splice
The V5 0–10° tilt keeps the edge vertical, so splice and miter joints align with no secondary grinding.
Large-format porcelain
Cut full porcelain slabs for facades, countertops and cladding without cracking the panel.
No chipping, no glaze damage
Cold waterjet cutting leaves the glaze and surface intact — no thermal stress at the edge.
Vertical edges, no rework
Parts leave the table ready to install, skipping the secondary finishing step entirely.
What it handles, and how thick.
Ceramicup to 80 mm(3.1 in)
Porcelain Slabup to 30 mm(1.2 in)Large-Format Tileup to 30 mm(1.2 in)Sanitary Wareall gaugesThe right platform for the job.
Real parts, real materials.
Build a machine for ceramic & porcelain.
Answer a few questions about the materials, thickness and slab sizes you run — we'll configure the right waterjet and send a quote.