Cold-cut metal: no heat-affected zone, no warping.
Waterjet cutting for metal fabrication: steel to 3.1 in (80 mm) and aluminum to 5.9 in (150 mm), plus titanium, brass and copper. The cold abrasive jet leaves no heat-affected zone, no thermal distortion and no slag. Parts come off clean and dimensionally stable.
Built for the metal shop.
No heat-affected zone
The cold jet cuts without melting the metal, so there's no HAZ, no hardening and no discoloration at the edge.
Thick plate & soft metals alike
Steel to 80 mm and aluminum to 150 mm on one platform, plus titanium, brass and copper without warping.
Clean edges, no slag
Parts come off the table with a clean cut edge and no slag or burr to grind off.
Volume with twin heads
Dual-head and dual-intensifier builds cut two identical parts per cycle for production runs.
What it handles, and how thick.
Aluminumup to 5.9 in(150 mm)
Steelup to 3.1 in(80 mm)
Stainless Steelup to 3.1 in(80 mm)
Titanium / Brass / Copperall gaugesThe right platform for the job.
Real parts, real materials.
Build a machine for metal.
Answer a few questions about the materials, thickness and slab sizes you run. We'll configure the right waterjet and send a quote.