The controller that runs the cut.
A 19-inch industrial touchscreen CNC with USB transfer and real-time altimetry — backed by remote diagnostics so the machine stays accurate and supported wherever it ships.
A solid controller, supported by the people who built it.
A waterjet is only as good as the control that drives the motion and holds the head on path. Rich machines run on an industrial CNC with a 19-inch touchscreen, USB program transfer and real-time altimetry — the fundamentals done well. Just as important, because Rich engineers its own head and intensifier, the same people who built the machine can connect remotely to diagnose and support it. The control keeps the cut accurate; the support keeps the machine running.
What you get on the panel.
19-inch industrial touchscreen CNC
Every machine ships with an industrial CNC on a 19-inch touchscreen — built for the shop floor, not a desktop. Operators set up, run and monitor the cut from one panel at the machine.
USB program transfer
Move cutting programs onto the controller over USB. No proprietary pipeline to wrestle with — generate your geometry, load it, run it.
Real-time altimetry
The control reads head height live and compensates for slab undulation as the machine cuts, keeping the jet at a consistent standoff so the cut stays even across the sheet.
Remote diagnostics & support
When a question comes up, Rich can connect remotely to look at the machine's state and help — so a shop in any of 60+ countries isn't waiting on a plane ticket to get answers from the people who built the equipment.
Configure your machine.
Every Rich waterjet ships with the same control and the same support behind it. Spec one to your work and get a real price.